Gilderfluke&Co 8 Bit Digital Audio Systems - Manual (Page 41)

"I" Reset All:
"JÓ Reset Cocked:
"K" (GROUP#) Reset Group:
These commands reset the addressed card(s) to the start of their memo-
ry. If the cards are running, the reset takes place after the current 1 KByte
block of sound data has played. The sound then continues from the start of
the memory. A start delay will only take place after a card has received a
RESET.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Mute Commands:
"L" (TRACK#) Mute Track:
"M" Mute All:
"N" Mute Cocked:
"O" (GROUP#) Mute Group:
These commands unconditionally mute the card(s) selected. If the
card(s) selected are already half-muted this command will override that
condition and fully mute them.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Half-Mute Commands:
"P" (TRACK#) Half-Mute Track:
"Q" Half-Mute All:
"R" Half-Mute Cocked:
"S" (GROUP#) Half-Mute Group:
NOT USED WITH AB-100 AudioBrick: These commands unconditionally
half-mute the card(s) selected. If the card(s) selected are already muted
this command will override that condition and half-mute them.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
Un-Mute Commands:
"T" (TRACK#) Un-Mute Track:
"U" Un-Mute All:
"V" Un-Mute Cocked:
"W" (GROUP#) Un-Mute Group:
These commands unconditionally un-mute the card(s) selected. If the
card(s) selected have their PA system active, the PA system will continue to
hold the cards in a half-muted condition until it is finished.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"X" (TRACK#) Cock Track:
This command sets the cocked flag on the Digital Audio Repeater Card
specified by the TRACK#. Until this flag is reset, this card will respond to all
COCKED commands. Any number of cards can be cocked at the same
time. This flag will be reset upon the receipt of any ÔCOCKEDÕ command, or
by using one of the two following RESET COCKED commands.
EXAMPLE: to cock card 00: X 0 0
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"Y" (TRACK#) Un-Cock Track:
This command resets the cocked flag on the Digital Audio Repeater
Card addressed by the TRACK#. After this flag is reset, the addressed card
will no longer respond to COCKED commands.
EXAMPLE: to un-cock card 00: Y 0 0
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
"Z" Un-Cock All:
This command resets the cocked flag on all the Digital Audio Repeater
G ILDERFLUKE & C O . ¥ 205 S. F LOWER ¥ B URBANK , C A 91502-2102 ¥ 818/840-9484 ¥ 800/776-5972 ¥ F AX 818/840-9485
33 of 72