IAI America ISPDACR-ESD - Manual (Page 34)

26
6SHFL¿FDWLRQ
Caution: Make sure the load installed on the actuator is not longer than the allowable overhung load
length (L). If the load is longer than L, vibration may occur or the settling time may increase.
If the allowable load moment is applied, not only the life of the guide will become shorter but
vibration or longer settling time may also result.
: If X and Y-axes are combined in a cantilever configuration, the base may deform.
Accordingly, keep the Ma and Mc moments to no more than one half the rated moment.
Y-axis
Keep the Ma and Mc
moments applied to this
slider to no more than one
half the rated moment.
X-axis