IAI America ISPDACR-ESD User Manual
Page 64
56
10. Maintenance/Inspection
Motor
end
Guide (right)
Guide (left)
Guide (right)
Guide (left)
Guide (right)
Guide (left)
Guide (left)
Guide (right)
Motor
end
Motor
end
Motor
end
Type
Nipple diameter
IS (P)D(A)CR-S
3.5
IS (P)D(A)CR-M
6.0
IS (P)D(A)CR-L
6.0
[3]
As a guide on how much grease should be squirted in,
repeat a pumping action roughly twice, although the specific
number varies depending on the size of the grease gun, etc.
[4]
Move the slider back and forth several times by hand.
[5]
Repeat the above lubrication process one more time.
[6]
Wipe off grease attached around the grease nipple.
[7]
Install the lubrication covers on both sides of the slider
cover.
Caution: In case the grease got into your eye, immediately go to see the doctor to get an appropriate
care. After finishing the grease supply work, wash your hands carefully with water and soap
to rinse the grease off.