IAI America DS-S-T1 - Manual (Page 20)

Page 18
F1 F2 F3 F4
F1 F2 F3 F4
Q
Data input for point 1
Using the F1 Key (Wrt) to establish, the Position No.
will advance by 1, turning into 2.
Mdi - 1 No 1 [1] - 2
XXXXX.XXX XXXXX.XXX
Input the number 0 and press the Return Key.
0.000 will display, and the axis number and name
will change to 2. Then, the cursor position will move
to the position data for the axis 2.
* It is possible to input position data up to for integer 4 digits before the decimal point and 3 digits after. The range depends on
the type of the machine. Therefore, please verify the range according to the appropriate product catalog.
Mdi - 1 No 2 [2] - 2
0.000 XXXXX.XXX
Input 50 into the position data for axis 2, then,
press the Return Key.
*Since the cursor position moves every time the
Return Key is pressed, input in sequence, first axis 1,
then, axis 2. For input error, move the cursor to that
location and do a substitution.
F1 F2 F3 F4
Mdi - 1 No 2 [1] - 2
0.000 50.000
F1 F2 F3 F4
Mdi - 2 No 1 [1] - 2
XXXXX.XXX XXXX.XXX
② Data input for point 2
Input 50 into the position data for axis 1, then press the
Return Key.
8. Examples of Simple Operation Procedure
Wrt Can Clr Etc
Wrt Can Clr Etc
Wrt Can Clr Etc
Wrt Can Clr Etc