IAI America DS-S-T1 - Manual (Page 43)

Page 41
F1 F2 F3 F4
F1 F2 F3 F4
The screen will change into the Program No. Input Mode
Screen, while the screen condition will change into the
Program No. 1 which was created in the Application
Program. Either press the F1 Key (Inc), or input the number
2 to turn the Program No. into 2.
Press the Return Key, and move the cursor to the Step No.
position.
Press the Return Key once again, and move the cursor to the
command input position.
Here, we will not input a command. Instead, since this is only
for a requirement input, press the Return Key once to change
the screen into the Continuous Requirement Input Mode
Screen.
Select the F4 Key (Not).
9. Operation
Edit 1 - 1 [ 10]
HOME 11
Inc Dec Clr Del
Edit 2 - 1 [ 0]
F1 F2 F3 F4
F1 F2 F3 F4
Inc Dec Clr Del
Edit 2 - 1 [ 0]
Inc Dec Clr Del
EXSR GOTO GRP HOLD
F1 F2 F3 F4
And Or Clr Not
Edit 2 - 1 [ 0]
_
Edit 2 - 1 [ 0]