Ront, Anel, Isplay – LevelOne IES-1085 User Manual
Page 13: Front panel display
User Manual
Page 13
Front Panel Display
POWER
This LED comes on when the switch is properly connected to power and
turned on.
Port Status LEDs
The LEDs are located on the front panel, displaying status for each respective
port. Please refer to the following table for more details.
LED
Status
Description
PW 1,2,3
Steady
Power On
Off
Power Off
10/100Base-TX
LNK/ACT
Steady
Network connection established
Flashing
Transmitting or Receiving data
PoE
Steady
Power Device (PD) is connected
Off
Power Device (PD) is disconnected
100Base-FX
LNK/ACT
Steady
Network connection established
Flashing
Transmitting or Receiving data
10/100/1000Base-TX & 1000Base-FX & SFP
LNK/ACT
Steady
Network connection established
Flashing
Transmitting or Receiving data