LevelOne IES-1085 - Manual (Page 17)

User Manual Page 17
DIN Rail Mounting
Fix the DIN rail attachment plate to the back panel of the Media Converter.
Installation: Place the Media Converter on the DIN rail from above using the slot. Push the
front of the Media Converter toward the mounting surface until it audibly snaps into place.
Removal: Pull out the lower edge and then remove the Media Converter from the DIN rail.
Connecting to Power
Redundant DC Terminal Block Power Inputs or DC Jack Power Input:
47-57VDC Jack
Step 1: Connect the supplied AC to DC power adapter to the receptacle on the topside of
the switch.
Step 2: Connect the power cord to the AC to DC power adapter and attach the plug into a
standard AC outlet with the appropriate AC voltage.
Redundant 47-57VDC DC Terminal Block Power
Inputs
There are two pairs of power inputs for use with redundant power sources. You only need
to have one power input connected to run the switch.
Step 1: Connect the DC power cord to the plug-able terminal block on the switch, and
then plug it into a standard DC outlet.