LevelOne IES-1085 - Manual (Page 71)

User Manual Page 71
an entry between 1 and 124 (seconds). Default = 10.
IGMP passive snooping:
1. Report suppression:
report suppression - report
suppression - Enable Disable for the switch. Use this
command to enable report suppression for IGMP version 1 and version 2. Report
suppression does not apply to IGMP version 3, and is turned off by default for IGMP
version 1 and IGMP version 2 reports. The switch uses IGMP report suppression to
forward only one IGMP report per multicast router query to multicast devices. When
IGMP router suppression is enabled, the switch sends the first IGMP report from all
hosts for a group to all the multicast routers. The switch does not send the remaining
IGMP reports for the group to the multicast routers. This feature prevents duplicate
reports from being sent to the multicast devices.
2. Update Setting: C Update Setting button when you finished IGMP Snooping.
NTP
Adjust RTC Time: Adjust system time for this Switch.
1. Year(2000-2099): C
Year specify year 2000 to 2099.
2. Month: C Month specify 1 to 12.
3. Day: C Month specify 1 to 31.
4. Hour: C Month specify 0 to 23.
5. Minute: C Month specify 0 to 59.
6. Second: C Month specify 0 to 59.
7. Submit: C Submit button when you finished Adjust RTC Time.
NTP Setting:
1. NTP Status:
NTP Status - NTP Status -down list to