LevelOne IES-1085 - Manual (Page 6)

User Manual Page 6
Power Input
Term
inal Bl
ock
PW1
+ 47 57VDC
Power Ground
PW2
+ 47 57VDC
Power Ground
Earth Ground
Relay Output 1A @ 250VAC
Relay Alarm warning signal disable for following:
1. The relay contact closes if Power1 and Power2 are both failed but Power3 on
2. The relay contact closes if Power3 is failed but Power1 and Power2 are both on

There are three power inputs can be used. Redundant power function is supported
PW3 is DC Jack type with 47 57VDC input
LED Status
LED Status Description
PW 1,2,3
Steady Power On
Off Power Off
10/100Base-TX
LNK/ACT
Steady Network connection established
Flashing Transmitting or Receiving data
PoE
Steady Power Device (PD) is connected
Off Power Device (PD) is disconnected
100Base-FX
LNK/ACT
Steady Network connection established
Flashing Transmitting or Receiving data
10/100/1000Base-TX & 1000Base-FX & SFP
LNK/ACT
Steady Network connection established
Flashing Transmitting or Receiving data