LevelOne IES-1085 User Manual
Page 137
User Manual
Page 137
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode, MD5 or SHA
authentication, and privacy. Use the no form of the command to delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (ro|rw) priv auth (md5|sha) AUTH_PASSWORD
des PRIV_PASS_PHRASE
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
PRIV_PASS_PHRASE encryption pass phrase
4. Example:
The following example adds a user (myuser) using snmp v3 with read-write access mode,
MD5 authentication (mypassword), and encryption pass phrase (mypassphrase):
switch_a(config)#snmp-server v3-user myuser rw priv md5 mypassword des
mypassphrase
switch_a(config)#