Teledyne LeCroy SAS Sample Test Suite User Manual
Page 80
SAS Sample Test Suite
Error Conditions – Connection not Established (Test Group E)
80
Receive OPEN_REJECT for unsupported protocol type (TestE.3)
SAS target ports shall reject and Open Request of an unsupported protocol type.
Test Procedure:
1. The Testing Station is instructed to start and complete a phy Reset sequence followed by an
Identify sequence with the DUT. Since the DUT is a target, the Testing Station is instructed to
transmit an Identify Address frame indicating that it is an initiator.
2. The Testing Station is instructed to transmit an OpenAddress frame to the DUT with an STP type
initiator role. The target does not support STP connection
3. Wait for the DUT to transmit OPEN_REJECT (Protocol not supported).
Observable Results: Verify that the DUT responded to the Open Address frame with OPEN_REJECT
(Protocol not supported).