Vanguard DMOM‐600 - Manual (Page 22)

Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL REV 2
18
3.3 Setting the Interface Language
Follow the steps below to set the interface language (English, Spanish, or Turkish):
a. Start from the “START‐UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [5] key (SET LANGUAGE).
c. The following screen will be displayed:
Select the preferred interface language by pressing the corresponding key on the
keypad (
[1] , [2] , or [3] ). The interface language will be set and a confirmation screen
will be displayed as shown below:
Press any key to return to the “START‐UP” menu.
ENGLISH SET
1. ENGLISH
2. TURKISH
3. SPANISH
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. set time
5. set language
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11