Vanguard DMOM‐600 - Manual (Page 59)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
55
NOTE
You can cancel the process and return to the “START‐UP” menu by
pressing the
[STOP]
key.
Type the record number that you would like to erase using the alpha‐numeric
keypad and then press the
[ENTER] key. If you do not know the test record
number, you can first view the test record directory using the instructions in
section 3.5.6.
The following screen will be displayed while the record is being erased:
The following screen will be displayed when the test record has been completely
erased:
Press any key to continue. You will be returned to the beginning of step d.
RECORD NUMBER 8
ERASED!
ERASing record
PLEASE WAIT...
ERASE RECORD
NUMBER: