Vanguard DMOM‐600 - Manual (Page 57)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
53
3.5.7. Erasing Test Records from the Flash EEPROM
Follow the steps below to erase test records from the Flash EEPROM
a. Start from the “START‐UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the [4] key (ERASE RECORD).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11