Vanguard DMOM‐600 - Manual (Page 9)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
5
The DMOM‐200 S3 is furnished with a 30‐ft test cable set. A 15‐ft test cable set is also available
as an option. Test cables are terminated with heavy duty welding type clamps. The test current
and voltage sense cables are isolated and fastened to the clamp jaws. This feature allows for a
simple connection to the circuit breaker bushing. An optional voltage sense cable and probe
can be used to measure resistance in small access locations. Optional heavy‐duty, welding type
C‐clamps are also available allowing the user to connect the test leads to a wide variety of
bushing sizes, bus‐bars, or large conductors.