Vanguard DMOM‐600 - Manual (Page 49)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
45
3.5.4. Restoring a Test Record From a USB Flash Drive
Use the steps below to restore a test record from a USB Flash drive to the Auto‐Ohm’s working
memory:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the Auto‐
Ohm’s USB Flash drive port (“USB MEM” port). Then start from the “START‐UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [3] key (SAVE/RESTORE RECORD)
c. The following screen will be displayed:
Press the [1] key (RESTORE RECORD).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11