Vanguard DMOM‐600 - Manual (Page 63)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
59
e. The following screen will be displayed:
1. ERASE SINGLE REC.
Press the
[1]
key (ERASE SINGLE REC.) to erase a single test record from the
connected USB Flash drive. The following screen will be displayed:
Type the record number that you would like to erase using the alpha‐numeric
keypad and then press the
[ENTER] key. The test record will be erased from the
USB Flash drive and the following screen will be displayed:
Press any key to continue. You will be returned to the beginning of step e. Press the
[STOP]
key to return to the “START‐UP” menu.
2. ERASE ALL RECORDS
Press the [2] key (ERASE ALL RECORDS) to delete all test records from the connected
USB Flash drive. The following warning screen will be displayed:
ERASE ALL THUMB DRIVE
RECORDS!
ARE YOU SURE?
"ENTER" TO CONTINUE.
THUMB DRIVE RE001
ERASED!
ERASE THUMB DRIVE
REC_
ERASE RECORD
1.ERASE SINGLE REC.
2.ERASE ALL RECORDS
"STOP" TO EXIT