Vanguard DMOM‐600 - Manual (Page 45)

REV 2 Auto‐Ohm 200 S3 / DMOM‐200 S3 / DMOM‐600 USER’S MANUAL
41
3.5.3. Restoring a Test Record From Flash EEPROM
Use the steps below to restore a test record from the Auto‐Ohm’s internal Flash EEPROM to the
working memory:
a. Start from the “START‐UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the unit.
Press the [1] key (RESTORE RECORD).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
1. RECORD ID
2. REVIEW RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1.RUN TEST
2.SETUP
3.QUICK TEST
time: 14:21:34
date: 05/24/11