Vanguard DigiTMR S2 - Manual (Page 107)

REV 1 DIGITMR S2 USER’S MANUAL
102
3.12.2. Setting Up the CLOSE Analysis Points
Follow the steps below to setup the CLOSE analysis points:
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the
[1]
key (ANALYSIS POINTS).
c. The following screen will be displayed:
Press the
[2]
key (CLOSE TIMING).
d. The following screen will be displayed:
Press the
[2]
key (DIST FROM CLOSE).
CLOSE ANALYSIS PT 1
1. PERCENT OF STROKE
2. DIST FROM CLOSE
3. CONTACT #1 CLOSE
1. OPEN TIMING
2. CLOSE TIMING
3. PRINT SETTINGS
4. TEST PLANS
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS