Vanguard DigiTMR S2 User Manual
Page 46
DIGITMR S2 USER’S MANUAL
REV 1
41
3.4.5. Setting the Frequency
Follow the steps below to set the frequency (50 or 60 Hz):
a. Start from the “START-UP” menu:
Press the
[3]
key (SET-UP).
b. The following screen will be displayed:
Press the
[5]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[3]
key (SET 50/60 HZ).
d. The following screen will be displayed:
Select the preferred frequency by pressing the corresponding key on the keypad (
[1]
for
50 Hz or
[2]
for 60 Hz). The frequency will be set and the following confirmation screen
will be displayed:
1. SET 50 HZ
2. SET 60 HZ
1. SET DATE & TIME
2. SET PRINT MODE
3. SET 50/60 HZ
4. SET LANGUAGE
5. BLUETOOTH DEV RESET
6. PREVIOUS PAGE
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS