Vanguard DigiTMR S2 - Manual (Page 56)

DIGITMR S2 USER’S MANUAL REV 1
51
d. The following screen will be displayed:
Press the [1] key (WINDOW = 1 SEC) to select the 1-second timing window.
e. The following screen will be displayed:
Press the [1] key (Internal Trigger) to select the internal trigger.
f. The following screen will be displayed:
Press the
[1]
key (OPEN) to select the OPEN timing operation.
g. The following screen will be displayed:
Press and hold down the
[ARM]
switch, and then press the
[START]
key. Continue to
hold down the [ARM] switch.
HOLD "ARM" UNTIL
TEST COMPLETES
"START" TO BEGIN
"STOP" TO ABORT
TIMING MODE:
1. OPEN 2. CLOSE
3. O-C 4. C-O
5. O-C-O
TRIGGER MODE:
1. INTERNAL TRIGGER
2. EXTERNAL TRIGGER
TIMING WINDOW:
1. WINDOW = 1 sec
2. WINDOW = 10 SEC
3. WINDOW = 20 SEC