Vanguard DigiTMR S2 - Manual (Page 51)

REV 1 DIGITMR S2 USER’S MANUAL
46
3.7 Performing Timing Tests
3.7.1. Timing an OPEN Operation With No Insertion Resistors
To time an OPEN operation with no insertion resistors:
e. Start from the “START-UP” menu:
Press the [1] key (TIME BREAKER) to start a test.
If a previous test shot is in the DigiTMR S2’s memory, the following screen will be
displayed:
1. SAVE SHOT
If you would like to save the previous shot in memory, press the [1] key (SAVE
SHOT). The following screen will be displayed:
Press the [ENTER] key. The following screen will be displayed:
Once the record is saved, the following screen will be displayed:
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS
SAVE IN PROGRESS
PLEASE WAIT
SAVE SHOT # 2
TEST: OPEN
DATE: 07/09/12 08:18
"ENTER" TO PROCEED
PREV SHOT NOT SAVED
1. SAVE SHOT
2. CONTINUE (NO SAVE)