Vanguard DigiTMR S2 User Manual
Page 91
REV 1 DIGITMR S2 USER’S MANUAL
86
Press any key to continue. The following screen will be displayed allowing you to
continue deleting additional records:
Follow the steps above to erase additional records or press the
[STOP]
key to
return to the “START-UP” menu.
2. ERASE ALL RECORDS
Press the
[2]
key (ERASE ALL RECORDS) to erase all records from the USB Flash
drive. The following screen will be displayed:
NOTE
You can press the
[STOP]
key if you do not want to delete any records.
You will be returned to the “START-UP” menu.
Press the
[ENTER]
key if you would like to erase ALL the test records stored on
the connected USB Flash drive. All records will be erased and the following
screen will be displayed:
ERASE ALL THUMB DRIVE
RECORDS!
ARE YOU SURE?
"ENTER" TO CONTINUE
ERASE RECORD
1. ERASE SINGLE REC
2. ERASE ALL RECORDS
"STOP" TO EXIT
THUMB DRIVE REC_001
ERASED!