Vanguard DigiTMR S2 User Manual
Page 36
DIGITMR S2 USER’S MANUAL
REV 1
31
3.4.1. Setting the Interface Language
Follow the steps below to set the interface language (English, Spanish, or Turkish):
a. Start from the “START-UP” menu:
Press the
[3]
key (SETUP).
b. The following screen will be displayed:
Press the
[5]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[4]
key (SET LANGUAGE).
d. The following screen will be displayed:
Select the preferred interface language by pressing the corresponding numeric key on
the keypad. The interface language will be set and the following confirmation screen will
be displayed:
1. ENGLISH
2. TURKISH
3. SPANISH
1. SET DATE & TIME
2. SET PRINT MODE
3. SET 50/60 HZ
4. SET LANGUAGE
5. BLUETOOTH DEV RESET
6. PREVIOUS PAGE
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS