Vanguard IRM-5000P - Manual (Page 20)

IRM-5000P USER’S MANUAL REV 2
16
5. Custom
Press the
[5]
key to enter a custom test voltage value. The following screen will
be displayed:
Type the desired test voltage (between 50 V – 5000 V) using the numeric keypad,
and then press the
[ENTER]
key. Continue to step e.
e. The following screen will be displayed:
1. YES
Press the
[1]
key (YES) if you would like to enter the Device Under Test (D.U.T.)
temperature. The following screen will be displayed:
Type the D.U.T. temperature using the numeric keypad. The screen will be
updated as shown:
Press the [ENTER] key and continue to step f.
2. NO
Press the
[2]
key (NO) if you do not want to enter the Device Under Test (D.U.T.)
temperature. Continue to step f.
Test Voltage (50-5K)
0 Volts
TERMINAL VTG: 1 V
ENTER TEMP (0-254 F)
120
°F
TERMINAL VTG: 1 V
ENTER TEMP (0-254 F)
°F
TERMINAL VTG: 1 V
ENTER D.U.T. TEMP?
1. YES 2. NO
TERMINAL VTG: 1 V