Vanguard IRM-5000P - Manual (Page 51)

REV 2 IRM-5000P USER’S MANUAL
47
Type the test number that you would like to erase and then press the [ENTER]
key. If you do not know the test number, you can first print a test record
directory using the instructions in section 3.2.4.
The following screen will be displayed while the test record is being deleted:
The following screen will be displayed when the test record has been completely
deleted:
Press any key to return to the “START-UP” menu.
2. ERASE ALL TESTS
Press the [2] key to erase all test records from the IRM-5000P’s Flash EEPROM.
The following screen will be displayed:
Press the
[1]
key if you do NOT want to erase all the test records. You will be
returned to the “START-UP” menu.
Press the
[2]
key if you would like to erase all the test records. The following
screen will be displayed while the test records are being deleted:
The following screen will be displayed when all test records have been
completely deleted:
Press any key to return to the “START-UP” menu.
ERASE COMPLETE!
TERMINAL VTG: 1 V
ERASING TESTS
PLEASE WAIT...
TERMINAL VTG: 1 V
ERASE ALL TESTS?
1.NO 2.YES
TERMINAL VTG: 1 V
TEST NUMBER 1
ERASED!
TERMINAL VTG: 1 V
ERASING TEST
PLEASE WAIT...
TERMINAL VTG: 1 V