Vanguard IRM-5000P - Manual (Page 53)

REV 2 IRM-5000P USER’S MANUAL
49
4.2 Setting the Frequency
To set the frequency:
a. Start from the “START-UP” menu:
Press the [2] key (UTILITIES).
b. The following screen will be displayed:
Press the
[3]
key (SETUP).
c. The following screen will be displayed:
Press the [4] key (50/60Hz).
d. The following screen will be displayed:
Press the [1] key (60 Hz) to set the frequency to 60 Hz, or press the [2] key (50 Hz). The
setting will be stored and you will be returned to the “START-UP” menu.
1.TEST ID 2.CLOCK
3.COMP INT 4.50/60Hz
5.
°C/°F
TERMINAL VTG: 1 V
1. 60 Hz
2. 50 Hz
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
3. RUN TEST 05/05/10
4. UTILITIES 15:15:15
Bat:
TERMINAL VTG: 1 V