Vanguard IRM-5000P - Manual (Page 33)

REV 2 IRM-5000P USER’S MANUAL
29
e. The following screen will be displayed:
1. YES
Press the [1] key (YES) if you would like to enter the Device Under Test (D.U.T.)
temperature. The following screen will be displayed:
Type the D.U.T. temperature using the numeric keypad. The screen will be
updated as shown:
Press the [ENTER] key and continue to step f.
2. NO
Press the [2] key (NO) if you do not want to enter the Device Under Test (D.U.T.)
temperature. Continue to step f.
f. The following screen will be displayed:
The IRM-5000P will perform self-calibration, and then the following screen will be
displayed:
Press the [ENTER] key to start the test.
CALIBRATING
PLEASE WAIT 25
TERMINAL VTG: 1 V
“ENTER” TO START!
SV 2500V 5Min
TERMINAL VTG: 1 V
ENTER TEMP (0-254 F)
120
°F
TERMINAL VTG: 1 V
ENTER TEMP (0-254 F)
°F
TERMINAL VTG: 1 V
ENTER D.U.T. TEMP?
1. YES 2. NO
TERMINAL VTG: 1 V