Vanguard IRM-5000P - Manual (Page 52)

IRM-5000P USER’S MANUAL REV 2
48
4.0 CHANGING SETUP PARAMETERS
4.1 Setting the Clock
To set the IRM-5000P’s internal clock:
a. Start from the “START-UP” menu:
Press the [2] key (UTILITIES).
b. The following screen will be displayed:
Press the [3] key (SETUP).
c. The following screen will be displayed:
Press the [2] key (CLOCK).
d. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
MM-DD-YY HH:MM:SS
_
1.TEST ID 2.CLOCK
3.COMP INT 4.50/60Hz
5.
°C/°F
TERMINAL VTG: 1 V
1.PRINT 2.SAVE/RES
3.SETUP
TERMINAL VTG: 1 V
1. RUN TEST 05/05/10
2. UTILITIES 15:15:15
Bat:
TERMINAL VTG: 1 V