Figure 5-12: sata drive cable connection – IEI Integration NANO-LX v1.21 User Manual

Page 102

Advertising
background image

NANO-LX EPIC SBC

Page 87

Figure 5-12: SATA Drive Cable Connection

Step 5:

Connect the cable to the SATA disk. Connect the connector on the other end

of the cable to the connector at the back of the SATA drive. See Figure 5-13.

Step 6:

Connect the SATA power cable. Connect the SATA power connector to the

back of the SATA drive. See Figure 5-13.

Step 0:

Advertising
See also other documents in the category IEI Integration Hardware: