1 lcd panel shift clock jumper, Figure 5-4: jumper locations – IEI Integration NANO-LX v1.21 User Manual

Page 90

Advertising
background image

NANO-LX EPIC SBC

Page 75

system fails to boot due to improper BIOS settings, reset the CMOS contents by

disconnecting and reconnecting the BT1 battery connector. Use small-sized

needle nose pliers to carefully disconnect and reconnect the BT1 battery

connector.

Figure 5-4: Jumper Locations

5.6.1 LCD Panel Shift Clock Jumper

Jumper Label:

JP1

Jumper Type:

3-pin header

Jumper Settings:

See Table 5-2

Jumper Location:

See Figure 5-4

The JP1 jumper sets the LCD panel shift clock.

Advertising
See also other documents in the category IEI Integration Hardware: