IEI Integration NANO-LX v1.21 - Manual (Page 127)

NANO-LX EPIC SBC
Page 112
Disabled The onboard USB controller is disabled.
Enabled (Default) The onboard USB controller is detected and enabled.
OnBoard IDE [Enabled]
Use the OnBoard IDE option to enable or disable the onboard IDE.
Disabled The onboard IDE is disabled.
Enabled (Default) The onboard IDE is detected and enabled.
UART Port A [Disabled]
Use the UART Port A option to select the I/O address and IRQ for the UART port A. The
UART Port A options are:
Disabled (Default)
3F8/IRQ7
2F8/IRQ5
3E8/IRQ7
2E8/IRQ5
Memory Hole At 15M – 16M [Disabled]
Use the Memory Hole At 15M – 16M option to reserve memory space between 15MB
and 16MB for ISA expansion cards that require a specified area of memory to work
properly. If an older ISA expansion card is used, please refer to the documentation that
came with the card to see if it is necessary to reserve the space.
Disabled (D EFAULT ) Memory is not reserved for ISA expansion cards
Enabled Memory is reserved for ISA expansion cards