IEI Integration NANO-LX v1.21 - Manual (Page 72)

NANO-LX EPIC SBC
Page 57
CAUTION!
SATA hard drives may come with both a 4P power connector and a SATA power
interface. Attach either the 4P connector or the SATA power cable to the SATA
hard drives. DO NOT attach both the power connectors to your SATA hard drives
at the same time! Doing so will cause damage.
Figure 4-23: CN10, CN11 Connector Locations
NOTE:
1. SATA is supported by:
• Windows 2000 SP4
• Windows XP SP1
• Windows 2003, or later versions.
2. Older OSes, such as Windows 98SE or ME, do not support the SATA interface.
4.2.22 SATA Power Connector
CN Label: CN38
CN Type: 2-pin wafer
CN Pinouts: See Table 4-26