IEI Integration NANO-LX v1.21 - Manual (Page 121)

NANO-LX EPIC SBC
Page 106
Enabled Enables SATA IDE use in DOS mode.
Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options:
First Boot Device [Default: HDD-0]
Second Boot Device [Default:SCSI]
Third Boot Device [Default: LS120]
Using the default values, the system first looks for a floppy disk to boot from. If it cannot
find a floppy disk, it boots from an HDD. If both The floppy and the HDD are unavailable,
the system boots from a CDROM drive.
Boot Device configuration options are:
Floppy
LS120
HDD-0
SCSI
CDROM
HDD-1
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Other Device [Enabled]
Use the Boot Other Device option to determine whether the system uses a second or
third boot device if the first boot device is not found.
Disabled The system does not look for second and third boot
devices if the first one is not found.