IEI Integration NANO-LX v1.21 - Manual (Page 105)

NANO-LX EPIC SBC
Page 90
Step 1: Locate the PS/2 connector. The location of the PS/2 connector is shown in
Chapter 3.
Step 2: Align the PS/2 connector. Align the PS/2 connector on the keyboard/mouse Y
cable with the PS/2 connector on the external peripheral interface.
Step 3: Insert the PS/2 connector . Once the connector is properly aligned, insert the
PS/2 connector from the keyboard/mouse Y cable into the PS/2 connector on
the NANO-LX. See Figure 5-15.
Step 4: Connect the keyboard and mouse. A keyboard and mouse can each be
connected to one of the PS/2 connectors. The keyboard PS/2 connector and
mouse PS/2 connector are both marked. Please make sure the keyboard and
mouse are connected to the correct PS/2 connector. Step 0:
Figure 5-15: PS/2 Connector