IEI Integration NANO-LX v1.21 - Manual (Page 88)

NANO-LX EPIC SBC
Page 73
5.5 CF Card Installation
NOTE:
The NANO-LX supports CF Type II card. For the complete
specifications of the supported CF cards please refer to Chapter 2.
To install the a CF Type II card onto the NANO-LX, please follow the steps below:
Step 1: Locate the CF card socket. Place the NANO-LX on an anti-static pad with the
solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-2. Step 0:
Figure 5-2: CF Card Installation