IEI Integration uIBX-210-CV-N2600 - Manual (Page 26)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 13
S te p 2: Install the antennas to the antenna connectors (Figure 3-1).
Figure 3-1: Wi-Fi Antenna Installation
3.4 AT/ATX Mo d e S e le c tio n
AT or ATX power mode can be used on the uIBX-210-CV-N2600. The selection is made
through an AT/ATX switch located on the rear panel (Figure 3-2). To select AT mode or
ATX mode, follow the steps below.
S te p 1: Locate the AT/ATX switch on the rear panel (Figure 3-2).
Figure 3-2: AT/ATX Switch Location
S te p 2: Adjust the AT/ATX switch. S te p 0: