IEI Integration uIBX-210-CV-N2600 - Manual (Page 56)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 43
 Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
5.3 Tu rn o ff th e P o we r
WARNING:
Failing to turn off the system before opening can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
5.4 Re p la c in g Co m p o n e n ts
5.4.1 Ha rd Dis k Drive (HDD) Re p la c e m e n t
To replace the hard drive, please follow the steps below:
S te p 1: Remove eight (8) retention screws from the back cover (Figure 5-1).
Figure 5-1: Retention Screws Removal
S te p 2: Remove the back cover and locate the HDD bracket (Figure 5-2).