Figure 5-2: hdd bracket retention screws, Figure 5-3: hdd bracket – IEI Integration uIBX-210-CV-N2600 User Manual
Page 57
Advertising
u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 44
S te p 3:
Remove the four HDD bracket retention screws and disconnect the SATA
connector (JSATA2), as shown in Figure 5-2.
Figure 5-2: HDD Bracket Retention Screws
S te p 4:
Lift the HDD bracket out of the uIBX-210-CV-N2600 (Figure 5-3).
Figure 5-3: HDD Bracket
S te p 5:
Remove the four HDD retention screws (Figure 5-4).
Advertising