IEI Integration uIBX-210-CV-N2600 - Manual (Page 41)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 28
Figure 3-23: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the RJ-45 connector. S te p 0:
3.8.4 RS -232S e ria l P o rt Co n n e c tio n
There are two RS-232 DB-9 connectors of the uIBX-210-CV-N2600 for serial device
connection. Follow the steps below to connect a serial device to the DB-9 connector of the
uIBX-210-CV-N2600.
S te p 1: Locate the DB-9 connector. The locations of the DB-9 connectors are shown
in Chapter 1.
S te p 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the uIBX-210-CV-N2600. See Figure 3-24.