IEI Integration uIBX-210-CV-N2600 - Manual (Page 71)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 58
 Hyper-Threading: Indicates if hyper-threading is supported by the CPU.
 Hyp e r-Th re a d in g [Dis a b le d ]
Use the Hyper-Threading function to enable or disable the CPU hyper-threading function.

Disabled Disables the use of hyper-threading technology

Enabled D EFAULT Enables the use of hyper-threading technology
6.3.4 S ATA Co n fig u ra tio n
Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Advanced
SATA Mode
[AHCI]
SATA Port1 Hitachi HTS543 (320.0
Select a configuration
for SATA Controller.
---------------------
: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
 S ATA Mo d e [AHCI]
Use the SATA Mode option to configure SATA devices.

IDE Configures SATA devices as normal IDE device.

AHCI D EFAULT Configures SATA devices as AHCI device.