IEI Integration uIBX-210-CV-N2600 - Manual (Page 60)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 47
S te p 7: Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR3 memory module down (Figure 5-7).
S te p 8: Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR3 memory module in the socket.
Figure 5-7: DDR3 SO-DIMM Module Installation
S te p 9: Replace the back cover and secure it using eight (8) previously removed
retention screws.
5.4.3 WLAN Ca rd Re p la c e m e n t
The uIBX-210-CV-N2600 has one WLAN card slot. To replace the WLAN card, follow the
instructions below.
S te p 1: Remove eight (8) retention screws from the back cover. See Section 5.4.1.
S te p 2: Remove HDD module. See Section 5.4.1.
S te p 3: Locate the WLAN card.