IEI Integration uIBX-210-CV-N2600 - Manual (Page 55)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 42
5.1 S ys te m Ma in te n a n c e In tro d u c tio n
If the components of the uIBX-210-CV-N2600 fail they must be replaced. Component that
can be replaced include:
 HDD module
 SO-DIMM module
 WLAN module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the uIBX-210-CV-N2600 are described below.
5.2 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the maintenance of the
uIBX-210-CV-N2600 may result in permanent damage to the
uIBX-210-CV-N2600 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the uIBX-210-CV-N2600. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the uIBX-210-CV-N2600 is accessed internally, or any
other electrical component is handled, the following anti-static precautions are strictly
adhered to.
 Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: - When configuring the uIBX-210-CV-N2600, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
uIBX-210-CV-N2600.