Remove the top cover, 1 remove the top cover, Figure 4-1: top cover retention screws – IEI Integration RPC-6022G User Manual
Page 40
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 40
Step 1:
WARNING:
Failure to follow the installation procedures outlined in this section may
cause severe damage to the RPC-6022GW Rackmount LCD
Workstation. Please follow the installation instructions carefully.
4.5.1 Remove the Top Cover
The top cover is secured to the RPC-6022GW Rackmount LCD Workstation with six
screws (three each on the left and right panels). To remove the top cover, please follow
the steps below.
Remove the six top cover retention screws (three each on the left and right
panels). (See Figure 4-1)
Figure 4-1: Top Cover Retention Screws
Advertising