Reinstall the drive brackets, 6 reinstall the drive brackets, Pter bracket ( figure 4-9 ) – IEI Integration RPC-6022G User Manual
Page 47: Ket ( figure 4-9 ), N 4.5.6
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 47
Step 1:
Step 2:
Step 3:
Figure 4-9: 3.5” to 5.25” Drive Adapter Bracket Retention Screws
4.5.6 Reinstall the Drive Brackets
After the drives have been installed, reinstall the drive brackets into the chassis.
NOTE:
It might be easier to connect the disk drive IDE/SATA connectors to the
ribbon cables and the disk drive power connectors to the PSU before
the drive brackets are reinstalled into the chassis.
Remount the drive brackets in the original position they were removed from.
Make sure all drive bracket retention screw holes are properly aligned with the
corresponding retention screw holes in the workstation.
Reinsert all drive bracket retention screws.
Step 0:
Advertising