Install the backplane, 7 install the backplane – IEI Integration RPC-6022G User Manual
Page 48
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 48
Step 1:
4.5.7 Install the Backplane
To install a backplane, follow the instructions below.
Install the correct amount of copper pillars (red circles in Figure 4-10 into the
base of the chassis. Depending on the backplane design, the white spacers
(blue circles in Figure 4-10) may also have to be installed.
NOTE:
The backplane shown in Figure 4-10 is an example for reference only.
The location and number of copper pillars depends on the backplane
being used.
Figure 4-10: Install Copper Pillars and White Spacers
Advertising