Psu replacement, 5 psu r, Eplacement – IEI Integration RPC-6022G User Manual
Page 68: Figure 5-1: psu external retention screws, 5 psu replacement
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 68
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
5.5 PSU Replacement
To replace a PSU, please follow the instructions below.
Turn off and disconnect the workstation from all power sources.
Remove the workstation from the rack in which it is installed.
Open the top cover of the RPC-6022GW Rackmount LCD Workstation. (See
Disconnect all the PSU cables from their devices.
Remove the four external retention screws that secure the PSU assembly to the
rear panel of the workstation (Figure 5-1).
Figure 5-1: PSU External Retention Screws
Advertising