Remove the cpu card clamp, 2 remove the cpu card clamp, Figure 4-2: remove the top cover from the chassis – IEI Integration RPC-6022G User Manual
Page 41
Advertising
RPC-6022GW Rackmount LCD Workstation
Page 41
Step 2:
Step 1:
Slide the top cover toward the rear panel to remove (Figure 4-2).
Step 0:
Figure 4-2: Remove the Top Cover from the Chassis
4.5.2 Remove the CPU Card Clamp
The CPU card clamp is secured to the RPC-6022GW Rackmount LCD Workstation with
two retention screws on the right side of the chassis. To remove the CPU card clamp,
please follow the steps below.
Remove two retention screws that secure the CPU card clamp to the chassis
Advertising