IEI Integration ITDB-100L - Manual (Page 14)

ITDB-100L Barcode Reader
Page 5
1.4 Technical Specifications
The ITDB-100L technical specifications are listed in Table 1-1.
Specifications
Supported 1D Symbologies
Code 39, code 93, interleaved 2 of 5, UPC/EAN (ISBN, UPCA,
UPCE, EAN13, EAN8), EAN 128, code 128, MSI, codabar
Supported 2D Symbologies
PDF-417, Micro PDF-417, QR Code/microQR Code,
Data Matrix
Sensor Major Specifications
Sensor: 1/3 inch CMOS with global shutter
Resolution: 752 x 480
Acquisition: Max. rate 60fps
Lens Major Specifications
Focus: Fixed
Code resolution: ≥0.33 mm
Reading distance (at code resolution): 50 mm ~ 330 mm
Illumination Element (nm)
2 x Red LEDs
Visible red light (λ= 650 nm ~ 660 nm)
I/O Interfaces
1 x Micro USB port (USB 2.0 data transmission rate: 480 Mbit/s)
1 x Ethernet port (Ethernet data transmission rate: 10/100 Mbit/s)
1 x DC in jack (Φ2.5/Φ5.5)
1 x 6-pin connector for trigger connection
1 x Trigger and tuning control button
1 x Power indicator
Acoustic indicators: Beeper
Operating Limits of the 6-pin
Connector for Trigger
Connection
Output of LED Flash Trigger
Current: 8mA
Voltage: 3.3VDC
Input of Interrupt Trigger
Current: 1.4mA@5VDC, 4mA@12VDC, 6.2mA@18VDC
Recommended operating voltage: 5VDC ~ 18VDC
Absolute voltage limits: 4.5VDC ~ 24VDC