1 usb keyboard wedge, 4 power input connector, Figure 3-11: usb standard type a connection – IEI Integration ITDB-100L User Manual
Page 34
ITDB-100L Barcode Reader
Page 25
Figure 3-11: USB Standard Type A Connection
3.3.3.1 USB Keyboard Wedge
After connecting the ITDB-100L to the USB port of a computer, the ITDB-100L will be
recognized by the computer as a second keyboard. When the ITDB-100L scans a barcode
without any API opened, the barcode data goes into the computer just as if it were being
typed on a keyboard.
3.3.4 Power Input Connector
Step 1:
Locate the power input connector. The location of the power input connector is
shown in Figure 1-3.
Step 2:
Connect the supplied power adapter to the power input connector of the
ITDB-100L.
Step 3:
Connect the power adapter to a power source by using the supplied power cord.
Step 4:
A beep should be generated, indicating that the ITDB-100L is fed with power.